Circle Track; Chevy Small-Block V-8 CT350 Engine Assembly - 19434602

|
19434602
$6,618.56 $0.00( / )

We at Maita Motorsports are Direct Authorized Chevrolet Performance Dealer.

We're Authorized IMCA Certified as well.

We offer 602 Factory Sealed Circle Track Race Engines in full race trimmed packages with the latest Crate drop-in Race Ready engines. These are truly race-ready packages with quality pieces as they’re contained with:

  • Amsoil Break-In (SAE 30W) Oil
  • Magnecor 10mm Race Plug Wires
  • Autolite Racing Spark Plugs
  • Distributor Lock-Out Kit installed.
  • All Valve Springs checked for correct tension.
  • Valves checked and all bolts checked and re-torqued.
  • Timing pointer checked and setup for accuracy.
  • Full 30 minutes Run Time Tested on Dyno for Engine Break-In
  • Cooled down and fully inspected for any leaks prior to delivery.
  • Guaranteed to perform and meet or exceed GM Horsepower Ratings with Dyno Sheet.
  • Race-Ready Prepared Package option and available on top of that add an MSD Pro-Billet Distributor and have it IMCA Certified, as well; we're your one stop shop.

We are an authorized IMCA Engine Supplier with Dyno Service on all engines we sell.


Additional Options are Available at Extra Cost:

  • MSD Pro-Billet Distributor
  • IMCA Certified Sealed Crates

Dynoed Engines available with complete Front Drives, Carburetor & Header Assemblies with Custom Tuning by Hutchinson's Racing Engines available.


We offer FedEx Ground shipped anywhere in the nation.


INSTALLATION NOTES

  • Requires addition of carburetor, starter, water pump, plug wires and exhaust system (not included)
  • Requires an externally balanced flywheel (not included).
  • The 8-quart circle track oil pan is 8 inches deep at the sump. It will clear most GM rear-steer chassis with stock engine location
  • For circle track racing only-not intended for street use
  • Circle Track racing engines from Chevrolet Performance include anti-tampering seals installed

Technical Specifications


Part Number: 19434602
Engine Type: Chevy Small-Block V-8
Displacement (cu in ): 350
Bore x Stroke (in ): 4.000 x 3.480
Block (P/N 19431835 ): Cast iron with 4-bolt main caps
Crankshaft (P/N 12691722 ): Forged steel
Connecting Rods (P/N 10108688 ): Powdered metal steel
Pistons (P/N 88894280 ): Hypereutectic aluminum
Intake Manifold (P/N 12366573 ): Dual-plane aluminum
Camshaft Type (P/N 24502476 ): Hydraulic flat tappet
Valve Lift (in ): .435 intake / .460 exhaust
Camshaft Duration (@.050 in ): 212° intake / 222° exhaust
Cylinder Heads (P/N 12691728 ): Vortec iron; 62cc chambers
Valve Size (in ): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.12:1 Nominal
Rocker Arms (P/N 10089648 ): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,500
Balanced: External

NOTE: Distributor with melonized steel gear MUST be used with long-blocks and partial engines with steel camshafts, or engine damage will occur.
Add to Wishlist
Categories:

We at Maita Motorsports are Direct Authorized Chevrolet Performance Dealer.

We're Authorized IMCA Certified as well.

We offer 602 Factory Sealed Circle Track Race Engines in full race trimmed packages with the latest Crate drop-in Race Ready engines. These are truly race-ready packages with quality pieces as they’re contained with:

  • Amsoil Break-In (SAE 30W) Oil
  • Magnecor 10mm Race Plug Wires
  • Autolite Racing Spark Plugs
  • Distributor Lock-Out Kit installed.
  • All Valve Springs checked for correct tension.
  • Valves checked and all bolts checked and re-torqued.
  • Timing pointer checked and setup for accuracy.
  • Full 30 minutes Run Time Tested on Dyno for Engine Break-In
  • Cooled down and fully inspected for any leaks prior to delivery.
  • Guaranteed to perform and meet or exceed GM Horsepower Ratings with Dyno Sheet.
  • Race-Ready Prepared Package option and available on top of that add an MSD Pro-Billet Distributor and have it IMCA Certified, as well; we're your one stop shop.

We are an authorized IMCA Engine Supplier with Dyno Service on all engines we sell.


Additional Options are Available at Extra Cost:

  • MSD Pro-Billet Distributor
  • IMCA Certified Sealed Crates

Dynoed Engines available with complete Front Drives, Carburetor & Header Assemblies with Custom Tuning by Hutchinson's Racing Engines available.


We offer FedEx Ground shipped anywhere in the nation.


INSTALLATION NOTES

  • Requires addition of carburetor, starter, water pump, plug wires and exhaust system (not included)
  • Requires an externally balanced flywheel (not included).
  • The 8-quart circle track oil pan is 8 inches deep at the sump. It will clear most GM rear-steer chassis with stock engine location
  • For circle track racing only-not intended for street use
  • Circle Track racing engines from Chevrolet Performance include anti-tampering seals installed

Technical Specifications


Part Number: 19434602
Engine Type: Chevy Small-Block V-8
Displacement (cu in ): 350
Bore x Stroke (in ): 4.000 x 3.480
Block (P/N 19431835 ): Cast iron with 4-bolt main caps
Crankshaft (P/N 12691722 ): Forged steel
Connecting Rods (P/N 10108688 ): Powdered metal steel
Pistons (P/N 88894280 ): Hypereutectic aluminum
Intake Manifold (P/N 12366573 ): Dual-plane aluminum
Camshaft Type (P/N 24502476 ): Hydraulic flat tappet
Valve Lift (in ): .435 intake / .460 exhaust
Camshaft Duration (@.050 in ): 212° intake / 222° exhaust
Cylinder Heads (P/N 12691728 ): Vortec iron; 62cc chambers
Valve Size (in ): 1.940 intake / 1.500 exhaust
Compression Ratio: 9.12:1 Nominal
Rocker Arms (P/N 10089648 ): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 34° Total @ 4,000 rpm
Maximum Recommended rpm: 5,500
Balanced: External

NOTE: Distributor with melonized steel gear MUST be used with long-blocks and partial engines with steel camshafts, or engine damage will occur.
Type: 

Engine Complete Assembly

Vendor: 

Chevrolet Performance Parts

SKU: 

19434602

California Residents: Prop 65 Warning