Chevy LT-Series Small-Block V-8 LT4 6.2L SC with wet sump - 19431955
Supercharged Power from the C7 Corvette Z06!
At the time of its release, the supercharged LT4 6.2 SC was the most powerful engine ever offered in a regular production Chevrolet, and was the heart of the Camaro ZL1. It features a compact, efficient 1.7L Eaton R1740 TVS supercharger, which spins at up to 20,000 rpm. That’s enough to generate more than 9 pounds of boost and help produce 650 horsepower and 650 lb.-ft. of torque.
The LT4 is based on the same Gen V Small-Block architecture as the LT1 engine, with several unique features designed to support its higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356T6 aluminum cylinder heads, which are stronger and handle heat better than conventional castings, lightweight titanium intake valves and stronger forged aluminum pistons.
INSTALLATION NOTES
- Assembly does not include any electronics
- Select the right controller kit for your LT4 engine.
- Can accomodate P/N 19420210 Hydraulic Power Steering Kit (not included with Accessory Drive System)
- Includes 8-bolt flexplate
- Not intended for marine applications
- Crankshaft has 8-bolt flywheel mounting pattern
- Engine includes direct injection and VVT
- Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine
Technical Specifications
Part Number: 19431955
Engine Type: Gen V Small-Block V-8
Displacement (cu in ): 376 (6.2L)
Bore x Stroke (in ): 4.065 x 3.622 (103.25 x 92mm)
Block: Cast aluminum with 6-bolt, cross-bolted main caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered-metal steel
Pistons: Forged aluminum
Camshaft Type: Hydraulic roller
Valve Lift (in ): .492 intake / .551 exhaust
Camshaft Duration (@.050 in ): 189° intake / 223° exhaust
Cylinder Heads: A356T6 Rotocast aluminum; as cast with 65.5cc chambers
Valve Size (in ): 2.130 intake / 1.590 exhaust
Compression Ratio: 10:1
Rocker Arms (P/N 12619829 ): Investment-cast, roller bearing trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended rpm: 6,600
Reluctor Wheel: 58x
Balanced: Internal
Supercharged Power from the C7 Corvette Z06!
At the time of its release, the supercharged LT4 6.2 SC was the most powerful engine ever offered in a regular production Chevrolet, and was the heart of the Camaro ZL1. It features a compact, efficient 1.7L Eaton R1740 TVS supercharger, which spins at up to 20,000 rpm. That’s enough to generate more than 9 pounds of boost and help produce 650 horsepower and 650 lb.-ft. of torque.
The LT4 is based on the same Gen V Small-Block architecture as the LT1 engine, with several unique features designed to support its higher output and the greater cylinder pressures created by forced induction. They include Rotocast A356T6 aluminum cylinder heads, which are stronger and handle heat better than conventional castings, lightweight titanium intake valves and stronger forged aluminum pistons.
INSTALLATION NOTES
- Assembly does not include any electronics
- Select the right controller kit for your LT4 engine.
- Can accomodate P/N 19420210 Hydraulic Power Steering Kit (not included with Accessory Drive System)
- Includes 8-bolt flexplate
- Not intended for marine applications
- Crankshaft has 8-bolt flywheel mounting pattern
- Engine includes direct injection and VVT
- Chevrolet Performance control kits do not use the Active Fuel Management components on this crate engine
Technical Specifications
Part Number: 19431955
Engine Type: Gen V Small-Block V-8
Displacement (cu in ): 376 (6.2L)
Bore x Stroke (in ): 4.065 x 3.622 (103.25 x 92mm)
Block: Cast aluminum with 6-bolt, cross-bolted main caps
Crankshaft: Forged steel
Connecting Rods: Forged powdered-metal steel
Pistons: Forged aluminum
Camshaft Type: Hydraulic roller
Valve Lift (in ): .492 intake / .551 exhaust
Camshaft Duration (@.050 in ): 189° intake / 223° exhaust
Cylinder Heads: A356T6 Rotocast aluminum; as cast with 65.5cc chambers
Valve Size (in ): 2.130 intake / 1.590 exhaust
Compression Ratio: 10:1
Rocker Arms (P/N 12619829 ): Investment-cast, roller bearing trunnion
Rocker Arm Ratio: 1.81:1
Recommended Fuel: Premium pump
Maximum Recommended rpm: 6,600
Reluctor Wheel: 58x
Balanced: Internal
Type: | |
---|---|
Vendor: | |
SKU: |
19431955 |
Weight: |
430.0 lb |